PRELA

About PRELA

Established in 2013, Prela New Materials Tech Co., Ltd is a high-end whole industrial chain PPF manufacturer and exporter.  Prela New Materials Tech Co., Ltd is engaged in researching, producing, and selling Paint Protection Film, Prela Paint Protection Film (PPF) is trusted by customers around the world as a luxury brand to provides a superior solution for car paint protection.

Prela aims to be a shaping force of the circular economy and promises to provide exceptional services to all of our customers and put them at the heart of our decisions.

P12 Future

P12 Future

Developed specifically for protecting automotive surfaces

from scratches, galvanic corrosion, abrasion and wear,

P12 Paint Protection Film is an excellent alternative to

molded protectors which can detract from the finished vehicle

appearance. This 12 mil film features a 10 mil polyurea-

thane base. The material has been rigorously tested for

gravel chip resistance as well as cracking, chalking and

dulling due to natural weathering for excellent film clarity

and gloss retention, and shows excellent tensile strength

and resistance to elongation or shrinkage.

Product performance

Model:P12 Future

Raw materails: Lubrizol USA

Glue: Ashland USA

Thickness: 12 mil

Warranty: 12 years

Product Features:

1) Produced in the highly purified dust-free workshop with high cleanliness.

2) All-round coverage of the original car paint, isolation, and protection of long-lasting and effective.

3)Prevent paint damage, and prevent paint corrosion.

4)Self-repairing scratches, enhance the brightness of the paint surface.

5)Good weathering and aging resistance.

IndexUnitRangeTest instrumentTest methods
Thicknessmil12Thickness testerGBT/29061
Elastic Moduluskgf/c㎡≤450Tensile testing machineASTM D-882
Coating elongation at break%≥ 100%Tensile testing machineSTM D-882
Initial tackN/in15 ≤ F ≤ 25Tensile testerFINAT3
Lasting tackN/in20 ≤ F ≤ 35Tensile testerFINAT3
Hydrophobicity>70, < 90Water drop angle testerGB/T 30693-2014
RepairS≤ 5Fine copper brush,hot water,hot gun200g/c㎡ brauch 10times test,and use 70°C hot water or hot win to make it repair
Aging resistance/E ≤ 2 , No cracking , No blisteringQUV aging resistance testerQUV(0.5W、4 0°C、360nm 、120min circulating ,spray 18min ,3200hours

FAQ's

If you don’t need to print a custom logo or other artwork on the products, it will not charge any cost. Just tell us your freight collect account like FedEx DHL TNT, if you don’t have an account, it needs to charge Express fee properly.

1.Stocked model 1 roll above.

2.Customized size/design/shape, MOQ 300-500rolls.

5-12 years, the warranty covers no cracking, no peeling, no delamination. As the car paint protection film is more demanding on the construction of the car paint surface, we recommend you to carry out the construction in the original factory paint surface.

Prelatek PPF, like any paint protection film (PPF), is designed to be resistant to yellowing. However, over time and with exposure to certain elements, some degree of yellowing can occur in PPFs. Factors that contribute to yellowing include exposure to UV rays, quality of the material, environmental pollutants, and the level of care and maintenance the film receives.

High-quality PPFs often come with UV inhibitors and other technologies that significantly reduce the risk of yellowing. Regular cleaning and maintenance can also help minimize yellowing. To understand the specific yellowing resistance of Prelatek PPF, it would be best to refer to the manufacturer’s specifications and warranty details, as they usually provide information on the longevity and durability of the film, including its resistance to yellowing.

It can repair itself from swirl marks and light scratches from car washes, etc. If a piece of debris has penetrated all the way through the clear coat on the film, it will not self-heal. The only way to fix this would be to have the piece of film replaced.

Prelatek PPF, like many paint protection films, is designed to minimize the amount of residual glue left behind after removal. The amount of residue can depend on factors such as the age of the film, the conditions it was exposed to, and the quality of the installation. Typically, high-quality PPFs, when removed properly, leave minimal to no residue. If there is any residual glue left, it can often be cleaned off with the appropriate solvents or by a professional. For the most accurate and specific information, it’s best to consult the product’s manufacturer guidelines or a professional installer.

The self-healing clear coat of our films is designed to repair itself from swirl marks and light scratches from car washes, etc. If a piece of debris has penetrated all the way through the clear coat on the film, it will not self-heal. The only way to fix this would be to have the piece of film replaced.

If there is left over adhesive upon removal, you can use a general purpose adhesive remover, often found at your local auto parts or home improvement store.

Any of our films can be installed on Chrome, though the finish will look slightly different than if left unprotected. We recommend having your installer apply a small swatch to the desired surface so you can see what it looks like before deciding.

The clear coat is the self-healing layer and is approximately 13 microns thick. If that layer is penetrated, the film will not heal.

  1. For small trial order, by air or by express :FEDEX, DHL, UPS, TNT etc
  2. For large order, we arrange shipment by sea or by air according to your requirement.
  1. High quality ensure.

We oriented ourselves as brand product. PRELATEK have been accepted by many oversea customers as a brand but not just a factory. We will be a stable and ever-growing supplier as always.

  1. Exceptional services.

We provide exceptional services to all of our customers and put them at the heart of our decisions.

  1. Low environment impact.

We have launched a sustainable framework to reduce our use of materials and energy in the production process.